home *** CD-ROM | disk | FTP | other *** search
/ JCSM Shareware Collection 1996 September / JCSM Shareware Collection (JCS Distribution) (September 1996).ISO / hutility / cdplay34.zip / MANUAL.WIN < prev    next >
Text File  |  1993-10-23  |  44KB  |  1,024 lines

  1. CDPlayer for Windows - (C)1993 Jupiter Software         Page 1
  2.  
  3. NOTICE
  4.  
  5. The information in this manual is subject to change without notice and does
  6. not represent a commitment on the part of Jupiter Software.  The software may
  7. be used or copied only in accordance with the terms of the licence agreement.
  8.  
  9. (C) 1993 Jupiter Software
  10. All rights reserved worldwide.
  11.  
  12.  
  13.  
  14. All rights are reserved.  This manual contains proprietary information
  15. which is protected by copyright.  No part of this manual may be reproduced,
  16. transcribed, stored in a retrieval system, translated into any language in any
  17. form whatsoever without the prior written consent of the publisher.
  18.  
  19. For information or support contact:
  20.  
  21. Jupiter Software
  22. 63 Parkside
  23. Wimbledon
  24. London
  25. SW19 5NL
  26. England
  27.  
  28. Tel: (+44) 081-946 4826
  29. Fax: (+44) 081-879 0090
  30.  
  31. EMail - CompuServe: 100140,2134
  32.      or pbrace@cix.compulink.co.uk
  33.  
  34. Jupiter Software is a member of the Association of Shareware Professionals
  35. (ASP)
  36.  
  37.  
  38. CDPlayer for Windows - (C)1993 Jupiter Software         Page 2
  39.  
  40.  
  41.  
  42. The programs in this package are proprietary products of Jupiter Software and
  43. are protected by Copyright Law.  Jupiter retains title to and ownership of the
  44. programs.  You are licenced to use the programs for a trial period of 30 days.
  45. After this period you must either register as a user or remove the programs
  46. from your system.  See ORDER.FRM for details of how to register.
  47.  
  48. Please read the Licence agreement contained in a seperate file.
  49.  
  50. CDPlayer for Windows - (C)1993 Jupiter Software         Page 3
  51.  
  52. Contents
  53.  
  54.         NOTICE
  55.  
  56.         LICENCE AGREEMENT
  57.  
  58.         CONTENTS
  59.  
  60.         A.  INTRODUCTION
  61.  
  62.         B.  BASIC OPERATIONS
  63.  
  64.             1. Run CDPlayer
  65.             2. Configuration options
  66.             3. Minimizing CDPlayer
  67.             4. Closing CDPlayer
  68.             5. The CD Handset
  69.             6. Display Area
  70.             7. Function Buttons
  71.  
  72.         C.  DISC CATALOGUE
  73.  
  74.             1. Entering/editing the record for the current disc
  75.             2. Browsing through your catalogue
  76.             3. Editing during browsing
  77.             4. Deleting a record
  78.             5. Rebuilding the database index
  79.             6. Export data
  80.             7. Import data
  81.             8. Open file window
  82.             9. Save As window
  83.  
  84.         D.  INTSTALLATION
  85.  
  86. CDPlayer for Windows - (C)1993 Jupiter Software         Page 4
  87.  
  88. A. INTRODUCTION
  89.  
  90. CDPlayer(TM) is an audio CD playing program for Windows which provides all the
  91. functions associated with a normal CD player, together with the ability to
  92. catalogue and search your CD collection.
  93.  
  94. Features include:
  95.  
  96.  
  97.     Custom programme play
  98.     Shuffle play
  99.     Single track play
  100.     Repeat on any play function
  101.     Track skip
  102.     Music search
  103.     Replay track
  104.     Pause
  105.     On screen volume control
  106.     On screen balance control
  107.     Disc catalogue allowing the storage of the following for each disc:
  108.         Disc name
  109.         Composer/artist
  110.         Music type
  111.         Disc reference
  112.         Individual track details
  113.     Browse through catalogue - with word search
  114.     On screen display of elapsed and remaining time for both the current
  115.         track and the disc.
  116.     Small handset toggle
  117.     User positioned and sizeable Handsets and Browse Window
  118.  
  119. ADDENDUM
  120.  
  121. The following changes have been made in revision 3.3 of CDPlayer.
  122.  
  123. 1       Custom Programme Selection
  124.  
  125.         A button is included on the full handset to allow you to select a
  126.         custom programme using pick lists.
  127.  
  128.         Click on the button, or select 'Control' followed by 'Custom
  129.         programme...' from the menu bar, and a dialog box will be displayed
  130.         showing two lists:
  131.  
  132.                 a       Tracks on disc
  133.                 b       Custom programme.
  134.  
  135.         A note of the running time for the current custom programme is also
  136.         shown.
  137.  
  138.         To add a track to the end of the list selected tracks, simply double
  139.         click on the track name in the track list.  Double clicking on a track
  140.         title in the custom programme list removes the track from the
  141.         programme.  As you make changes to the selected items the running
  142.         time of the custom programme is updated.
  143.  
  144.         When you are happy with your selections, click on OK and it will be
  145.         saved.  If you do not wish to store your selection click on Cancel and
  146.         the original list will be left unchanged.
  147.  
  148. 2       Fit tracks to time
  149.  
  150.         This facility allows you to make a selection of the number of tracks
  151.         which will fit within a specified time period.  This can be very
  152.         useful when you wish to record from CDs.
  153.  
  154.         Select 'Control' followed by 'Fit tracks to time...' from the menu bar
  155.         of the full handset.  The system will ask you to enter the number of
  156.         minutes of music you require - it will offer a default of 45.
  157.  
  158.         Enter a number between 1 and 80 and click on OK.  If you do not wish
  159.         to proceed clicking on Cancel will return you to the handset.
  160.  
  161.         The system will see how many tracks it can fit in the time entered and
  162.         display a message box with the number of tracks and the playing time.
  163.         If you wish to continue click on Yes and the tracks selected will be
  164.         placed in the Custom Program field of the disc record and you will be
  165.         presented with the Custom Program pick list to allow you to make
  166.         adjustments to the list if you wish.  Clicking on No will return you
  167.         to the handset without changing the existing programme.
  168.  
  169.         If you wish you can now make changes to the tracks selected and then
  170.         click on OK to return to the handset.
  171.  
  172.         To play the music fitting to the time entered, select Mode and Custom,
  173.         then Play.
  174.  
  175. 3       Support for multiple CD ROM drives
  176.  
  177.         CDPlayer for Windows allows you to select which CD ROM you wish to use
  178.         when you have more than one in your system.  On first running
  179.         CDPlayer, it will default to the first drive installed, however, once
  180.         you change the drive it will remember your changes and use your
  181.         selected drive on subsequent accesses.
  182.  
  183.         To select a drive, proceed as follows:
  184.  
  185.         a       Select 'File' then 'Select CD ROM drive...' from the menu bar.
  186.  
  187.         b       A dialog box will appear in which will be listed the drives
  188.                 available to you.
  189.  
  190.         c       Select the drive to be used, either by double clicking on the
  191.                 drive letter, or clicking on it once and then on OK, and the
  192.                 drive will be selected.
  193.  
  194.         If, after calling up the dialog box you decide that you do not wish to
  195.         continue, simply click on Cancel.
  196.  
  197.  
  198.  
  199. CDPlayer for Windows - (C)1993 Jupiter Software         Page 5
  200.  
  201.  
  202. B. BASIC OPERATIONS
  203.  
  204. 1   Run CDPlayer
  205.  
  206.     You may either run CDPlayer by clicking on the CD icon in the Jupiter
  207.     program group, or by using the Run program option provided in the File
  208.     menu of the program manager.  To use the latter method, click on File and
  209.     then Run...  and enter:
  210.  
  211.           C:\CDPLAYER\PLAYER        <Enter>
  212.  
  213.     substituting a different drive and path if you have installed CDPlayer
  214.     elsewhere.
  215.  
  216.     The handset will be displayed and the system will interrogate the first CD
  217.     drive to see if a disc is loaded and if it is playing --- on most systems
  218.     play will not be interrupted by running CDPlayer.  If a disc is found the
  219.     information relating to the disc will be loaded and the handset will
  220.     display information which is relevant to it.  If no disc is found in the
  221.     first drive, the system will show an error status in the handset display.
  222.     This error status will disappear as soon as a disc is inserted into the
  223.     drive.  You may change the CD at any time without reloading CDPlayer.  The
  224.     program will register that you have switched discs and load the
  225.     information relevant to the new disc.
  226.  
  227.     You may minimize the program at any time.  The CD icon will be displayed
  228.     together with the number of the track that is playing.  This will be
  229.     updated as play progresses.
  230.  
  231. 2   Configuration Options
  232.  
  233.     If, you are happy with the default colours and database files used there
  234.     is no need to change the system configuration.  However, you may change
  235.     the colours used to display the information on the handset and the name of
  236.     the file set used to store your CD catalogue.
  237.  
  238.     Whenever CDPlayer needs to access the database it will look in the working
  239.     directory for files with the following names:
  240.  
  241.           DISCS.IX
  242.           DISCS.DAT
  243.  
  244.     If they are not found it will create these two files to store a new
  245.     database.
  246.  
  247.     If you wish to use a different directory or file name, you may by
  248.     selecting:
  249.  
  250.           File
  251.           Change database
  252.  
  253.     from the handset menu bar.
  254.  
  255.     When you select this, the Open File dialog box will appear to allow you to
  256.     enter th epath and name of the file set.  If no path is quoted the
  257.     working directory is used to store the files.  Enter the path and name you
  258.     would like to use and click on OK.  It is possible to have more than one
  259.     database stored on the disk and switch between them using this facility.
  260.     When the system is loaded it will always default to the last file set
  261.     used.
  262.  
  263.  
  264. CDPlayer for Windows - (C)1993 Jupiter Software         Page 6
  265.  
  266.  
  267.     It is also possible to change the handset colours, by selecting:
  268.  
  269.           File
  270.           Configure
  271.  
  272.     from the handset menu bar.
  273.  
  274.     When you select this, a dialogue box will appear containing a acroll bar
  275.     for each of the three prime colours and four check boxes for the four
  276.     elements which can be changed:
  277.  
  278.           Handset background
  279.           LCD text
  280.           Disk/track background
  281.           Disk/track text
  282.  
  283.  
  284.     To change any of these, click on the name of the item to be changed and
  285.     its current settings will appear on the scroll bars and in the ``Current
  286.     colour'' box.  Move the scroll bars until the desired colour has been
  287.     achieved.  As you change the colour, the effect of the change will also be
  288.     shown on the handset (this does not apply to the handset background colour
  289.     which will not take effect until CDPlayer is closed and rerun).  Once you
  290.     have created your preferred colour, you may click on another check box and
  291.     make further changes.
  292.  
  293.     Once you are happy with the colours you have selected, click on OK,
  294.     alternatively you may abandon the changes you have made by clicking on
  295.     Cancel.  In this case the handset will revert to the colours used before
  296.     your current changes.
  297.  
  298.     You may, at any time, revert to the installation defaults by deleting the
  299.     file called CONFIG.CDP in the working directory as, if the file is not
  300.     found by CDPlayer, it will be create using the default settings.
  301.  
  302.     The following is a summary of how each colour is used.
  303.  
  304.     a)  Handset background
  305.  
  306.         This colour is used to display the background for the handset, it
  307.         defaults to white on dark blue.  Any changes you make to this colour
  308.         will not be activated until the next time you run CDPlayer.
  309.  
  310.     b)  LCD text
  311.  
  312.         This colour is used to display the text on the LCD display, it
  313.         defaults to red.  Please note that this is only used to display the
  314.         text not the numbers.  The numbers are bitmaps and will always be red
  315.         on black.
  316.  
  317.     c)  Disc/track backound
  318.  
  319.         This colour is used to display the background of the area which shows
  320.         the name of the current disk and track, it defaults to white.
  321.  
  322.     d)  Disc/track text
  323.  
  324.         This colour is used to display the text in the area which shows the
  325.         name of the current disk and track, it defaults to black.
  326.  
  327. CDPlayer for Windows - (C)1993 Jupiter Software         Page 7
  328.  
  329.     Icon
  330.  
  331.     An option is available to set the minimize icon to always be shown over
  332.     your current application.  This option is set by a check box toggle in the
  333.     configuration dialogue box.  Select:
  334.  
  335.           File
  336.           Configure
  337.  
  338.     from the handset menu bar and the dialogue box will be displayed.  To the
  339.     right of the box is a check box labeled Keep icon on top.  If this box is
  340.     checked the icon will always show through when it is covered by another
  341.     window, if it is unchecked it will not.  Click on the item to toggle the
  342.     check on and off, then select OK to save your current settings.
  343.  
  344.     Font
  345.  
  346.     It is possible to change the font used for displaying the display area and
  347.     the disc and track details on the handset.  To do this select:
  348.  
  349.           File
  350.           Configure
  351.  
  352.     from the handset menu bar and the configuration dialogue box will  be
  353.     displayed.  To the right of the box is an area showing the current font,
  354.     point size and bold setting.  To amend the current setting, simply edit
  355.     the font name and point size and click on the check box to toggle bold on
  356.     and off.  Exiting the configuration window by clicking on OK will save the
  357.     new settings and change the display in the handset to reflect the changes
  358.     made.  Clicking on Cancel will abandon any changes made.
  359.  
  360.     If you enter an invalid font name the default font will be used.  If you
  361.     enter an invalid point size your changes will be ignored.
  362.  
  363.     Skip time
  364.  
  365.     The final option available on the configuration dialogue box, is to change
  366.     the number of seconds which are skipped when FF and Rew are pressed.  To
  367.     change these, open the dialogue by selecting:
  368.  
  369.         File
  370.         Configure
  371.  
  372.     The current setting is displayed at the bottom right of the dialogue window.
  373.     You may edit the current setting to reflect the time interval you would
  374.     like to use and click on OK to save your new settings.  Provided you have
  375.     entered a valid number, the new setting will be accepted and will take
  376.     immediate effect.
  377.  
  378. 3   Minimizing CDPlayer
  379.  
  380.     CDPlayer can be minimized to a CD icon at any time by cliking on
  381.     the Minimize button (top right of the window), or using the Control-menu
  382.     box (top left).  To use the Control-menu box, click on it and select
  383.     Minimize from the menu.
  384.  
  385.     CDPlayer will continue to play the CD while it is minimized --- all modes
  386.     including shuffle and custom programmes are supported in this state.  It
  387.     also diplays the current track number beneath the icon or the fact that
  388.     the CD has stopped.
  389.  
  390. 4   Closing CDPlayer
  391.  
  392.     CDPlayer can be closed at any time by selecting File from the menu bar and
  393.     then Exit.  You may also use the Control-menu box (top left).  Either
  394.     double click on the box or click on it once and select Close from the
  395.     menu.
  396.  
  397.     If a CD is being played when the program is closed, it will continue
  398.     playing until the last instruction issued to the drive is completed.  This
  399.     would have been to play the whole disk in Disk Mode or a single track in
  400.     any other mode.
  401.  
  402. 5   The CD Handset
  403.  
  404.     The handset is made up of four areas:
  405.  
  406.         Display -   showing the play mode, track being played
  407.                     and track and disc time elapsed and remaining.
  408.         Play controls - the ``buttons'' providing the controls normally
  409.                         available on a CD player.
  410.         Disc details -  an area showing the name and title of the music
  411.                         being played.  (This information is drawn from the
  412.                         database and will only be shown once the details have
  413.                         been entered.)
  414.         Database controls - ``buttons'' providing access to the CD database,
  415.                             and volume control.
  416.  
  417.     A small handset display is available which shows:
  418.  
  419.         Disc and track name
  420.         Four small control buttons for
  421.           Play
  422.           Stop
  423.           Pause
  424.           Eject
  425.         Volume control
  426.  
  427.     The operation of these controls follows the corresponding control on the
  428.     full handset, as set out in the following pages.
  429.  
  430.     To switch to the small handset select Small from the menu bar and it will
  431.     be displayed.  Selecting Full handset from the menu bar of the small
  432.     handset return to the full display.
  433.  
  434.     You may size the handsets, by dragging the boarders, and reposition them
  435.     by dragging the title bar.  CDPlayer will "remember" your changes and use
  436.     them the next time the program is launched.
  437.  
  438.     Note on volume control
  439.  
  440.     Not all drives support variable volume software control and on these
  441.     drives the volume will be constant if the volume slider is anywhere but
  442.     fully left, or the balance slider is fully to one side, when play will be
  443.     muted on one or both speakers.
  444.  
  445.  
  446. CDPlayer for Windows - (C)1993 Jupiter Software         Page 8
  447.  
  448. 6   Display Area
  449.  
  450.     The display area, at the top of the handset, is made up of
  451.     four lines of information relating to the current disc being played.
  452.  
  453.     Line 1
  454.  
  455.     To the left of line 1 is displayed the current mode of play, this can be
  456.     one of four modes:
  457.  
  458.         Disc            play the whole disc from the currently selected track
  459.         Track           play the selected track only
  460.         Shuffle Play    play the tracks on the disc in a random order.
  461.         Custom Play     play the tracks listed in the custom play field of the
  462.                         disc's record.
  463.  
  464.     To the right of line 1 the word ``Repeat" will be displayed if the
  465.     currently selected play mode is to be repeated, i.e.  repeat the whole
  466.     disc, the track or the custom programme.
  467.  
  468.      Line 2
  469.  
  470.     To the left of line 2 will appear one of the following:
  471.  
  472.         Stop        this will appear if the disc inserted is not currently
  473.                     being played
  474.         Play        this will appear if the disc is currently being played
  475.         Pause       this will appear if pause has been pressed
  476.         Working     this will appear momentarily when one of the function keys
  477.                     has been pressed
  478.         Reading     this will be displayed when the player is loading control
  479.                     data from the disc.
  480.         Error       this will be displayed if no disc is present in the first
  481.                     drive or if the drive is open.
  482.  
  483.     The remainder of line 2 simply contains headings for the information
  484.     displayed on lines 3 and 4.
  485.  
  486.     Line 3
  487.  
  488.     This line contains details of the track currently selected, or being
  489.     played, together with the playing time elapsed and that remaining for the
  490.     track.
  491.  
  492.     Line 4
  493.  
  494.     This line contains details of the amount of playing time which has elapsed
  495.     and is remaining for the disc.
  496.  
  497. 7   Function Buttons
  498.  
  499.     The second area of the handset shows the keys which are active when
  500.     CDPlayer is running.  To select a function, click on the relevant button
  501.     to ``press'' it.  The button will react and then gain focus, which is
  502.     shown by a dotted box appearing, and the operation will be executed.  It
  503.     is also possible to select a function by pressing the letter which is
  504.     underlined on the button, providing no buttons have focus.
  505.  
  506.     A third method of selecting each function is provided through the handset
  507.     menu bar.  To select a function using the menu, click on the menu, which
  508.  
  509. CDPlayer for Windows - (C)1993 Jupiter Software         Page 9
  510.  
  511.     will cause the display of the menu items, and then on the funciton name.
  512.     You may also use the letter underlined in the menu names in conjunction
  513.     with the Alt key, to select menus and items.
  514.  
  515.     The functions available are as follows:
  516.  
  517.     Play    Pressing this key will either play the whole of the disc from
  518.             the currently selected track, the selected track only, a custom
  519.             programme or a random programme, depending on the play mode (see
  520.             Mode below).
  521.  
  522.     Pause   Pressing this key will cause play to pause, and pressing the
  523.             key a second time will result in play continuing.
  524.  
  525.     Stop    Pressing this key causes play to cease.
  526.  
  527.     Eject   For drives which have an automatic eject and closing facility,
  528.             this key will either open or close the drive.  If a disk is being
  529.             played, play will cease and the disc will be ejected.
  530.  
  531.     Last    This key causes the system to move back to the previous track
  532.             on the disc based on the mode of play.
  533.  
  534.     Next    This key causes the system to move forward to the next track
  535.             on the disc based on the mode of play.
  536.  
  537.     Track   Pressing this key causes the system to present a dialog box from
  538.             which you can select the track to jump to.  Click on the track you
  539.             wish to play and then on OK.  If the disk is in play mode, play
  540.             will continue from the selected track.  If you do not wish to
  541.             select a new track click on Cancel or on OK without first
  542.             selecting a track from the list.
  543.  
  544.     Rept.   This key toggles repeat mode.  When repeat mode is on, ``Repeat"
  545.             is displayed on line 1 of the display, the current play mode will
  546.             repeat continuously until Rept.  is pressed again (or Stop is
  547.             pressed).
  548.  
  549.     Rew     Pressing this key causes the system to jump a number of seconds
  550.             earlier in the track.  This key is only effective while a CD is
  551.             being played and the number of seconds jumped is defined by
  552.             selecting Configure.
  553.  
  554.     FF      Pressing this key causes the system to jump a number of seconds
  555.             later in the track.  This key is only effective while a CD is
  556.             being played and the number of seconds jumped is defined by
  557.             selecting Configure.
  558.  
  559.     Again   Pressing this key, when a disc is being played, will cause the
  560.             system to play the currently selected track from the beginning.
  561.  
  562.     Mode    This key opens a dialogue box which lists the four modes of play,
  563.             with the current mode highlighted.  The four modes of play are:
  564.  
  565.             Disc    play the whole disc from the track currently selected.
  566.             Track   play the current track only.
  567.             Custom  play the tracks entered in the custom play field of the
  568.                     database record for the current disc.  Whenever a disc is
  569.                     inserted, the program identifies the disc and if a record
  570.                     exists for it, it will be loaded and any custom play
  571.                     programme will be available.
  572.             Shuffle Shuffle the tracks into a random order for playing.  If
  573.                     repeat is on when playing a disk in shuffle mode, the disk
  574.                     will be repeated played with the tracks shuffled into a
  575.                     different order on each repeat.
  576.  
  577.     To change the mode of play, click on the mode required, which will then be
  578.  
  579. CDPlayer for Windows - (C)1993 Jupiter Software         Page 10
  580.  
  581.     highlighted, and then click on OK.  Clicking on Cancel will return to the
  582.     handset laving the mode of play unchanged.
  583.  
  584.     If you select ``Custom play'' mode and no programme is recorded for the
  585.     disk, pressing Play will have no effect.  To play the disk you will have
  586.     to switch to one of the other play modes.
  587.  
  588.     The mode dialoge box can only be accessed if the CD drive is not actually
  589.     playing a disk.
  590.  
  591.     At the foot of the handset, four buttons are displayed:
  592.  
  593.     Data    Pressing this key will cause the system to display an edit screen
  594.             containing details relating to the disc currently inserted:
  595.  
  596.             1.  If a record already exists for the disc inserted in the drive
  597.                 the record will be loaded and offered for editing.
  598.  
  599.             2.  If a record does not exist for the disc inserted in the drive
  600.                 the system will load the track data from the CD and offer a
  601.                 blank record for a new record to be created.
  602.  
  603.     See the next section for details of the disc catalogue.
  604.  
  605.     Browse  Pressing this key causes the system to display a screen listing the
  606.             disks you have recorded in your catalogue.  You may scroll
  607.             through and edit the entries as described in the next section.
  608.  
  609.     Vol     This key provides access to a dialogue box containing two scroll
  610.             bars, one in respect of volume and the other balance.  The current
  611.             settings are shown by the correct ``thumb'' position.  To increase
  612.             the volume move the scroll marker to the right and to reduce the
  613.             volume move it to the left.  Balance adjusts the relative volume
  614.             between the left and right speakers.
  615.  
  616.             You may move the scroll position by pointing to the ``thumb''
  617.             marker, holding down the left mouse button and draging to the left
  618.             or right, or by clicking on the left or right arrows at the end of
  619.             the scroll bars.  You may also click on the bar to the left or
  620.             right of the ``thumb'' marker to obtain larger jumps.
  621.  
  622.             Please note that not all drives support software controled volume
  623.             and balance.
  624.  
  625. CDPlayer for Windows - (C)1993 Jupiter Software         Page 11
  626.  
  627. C. DISC CATALOGUE
  628.  
  629. CDPlayer provides a facility for maintaining and searching a catalogue of your
  630. CDs.  Whenever a CD is inserted in the drive, identifies the disc and
  631. determines whether or not a record exists in the database.  If a record is
  632. found it is loaded and any custom play programme is made available for
  633. playing.  If a record is not found will allocate a unique identification to
  634. the disc and determine the number of tracks and playing time of each.  It is
  635. possible to play CDs which do not have an entry in the database, however, the
  636. custom play facility will not be available until a record has been created.
  637.  
  638. 1   Entering/editing the record for the current disc
  639.  
  640.     When a disc is inserted in the drive, the system displays details
  641.     regarding the disc in the handset display and you may access the database
  642.     record for the CD by pressing Data - this will operate whether or not the
  643.     current CD is being played or is in ``stop mode".  On pressing Data the
  644.     Record Edit Screen will be displayed.
  645.  
  646.     If a record for the CD already exists it will be loaded and presented to
  647.     you for edit, if no record exists a blank record screen will be displayed
  648.     containing the total tracks on the disc, the total playing time and the
  649.     playing times for each track.
  650.  
  651.     Each record consists of the following:
  652.  
  653.         Disc name       up to 30 characters.  Records are sorted alphabetically
  654.                         by disc name when displayed in browse mode, see below.
  655.  
  656.         Composer/Artist this may be up to 30 characters and can be used to
  657.                         record the composer or artist.
  658.  
  659.         Music type      a field of 15 characters which you can use to identify
  660.                         the type of music, e.g.  baroque, romantic, pop etc.
  661.  
  662.         Custom play     this field is 30 characters long and contains the
  663.                         tracks to be played when custom play mode is selected.
  664.                         Tracks are identified by a number from 1 to 9 or a
  665.                         letter from A to K (representing tracks 10 to 20).
  666.                         To set up a custom play simply enter the track
  667.                         identifications one after the other in the order in
  668.                         which they are to be played.  For example if you wish
  669.                         to play track 7 followed by 10 and then 15, enter
  670.                         ``7AF".  You may repeat tracks within the sequence.
  671.  
  672.         Disc reference  a field of 15 characters in which you may record the
  673.                         reference by which you identify the disc.  It is
  674.                         sensible to allocate unique references to each of your
  675.                         discs as this field is displayed when browsing
  676.                         through your CD collection, thereby providing a means
  677.                         of identifying the disc you are seeking.
  678.  
  679.         Track details   you may enter a description of up to 50 characters for
  680.                         each track on the disc (100 characters for registered
  681.                         users).  You may enter data in each of the track
  682.                         fields shown even if there is no corresponding track
  683.                         on the disk.  This enables you to store general
  684.                         information about the CD, if you wish.  When browsing
  685.                         through your CD catalogue, ``word filter" searches all
  686.                         fields within a record including track details, it is
  687.                         therefore possible to search for a particular track
  688.  
  689.  
  690. CDPlayer for Windows - (C)1993 Jupiter Software         Page 12
  691.  
  692.                         and then identify the disc on which it resides.  See
  693.                         section on browsing below.
  694.  
  695.         Disc ID         A Unique 8 digit hex string allocated by CDPlayer to
  696.                         identify each disc.
  697.  
  698.     The system allows you to record details of up to 30 tracks for each CD.
  699.     Two edit screens are provided, one for discs with 15 or less tracks and
  700.     one for those with over 15 tracks.  The edit screen for the the former,
  701.     displays the track list in a single column while that for the latter uses
  702.     a two column format.
  703.  
  704.     On accessing the record, the entry field will be positioned by Disc name.
  705.     Enter or edit the name of the disc (if you try and enter more than 30
  706.     characters the system will beep) and press Tab to move to the
  707.     Composer/Artist.  field.  You may continue entering the fields one at a
  708.     time and on completing the entry for the final track the focus will move
  709.     to OK then to Cancel from which it will move back to Disc name.
  710.  
  711.     You may move from field to field by pressing the Tab and Shift+Tab keys,
  712.     or by clicking on the field to be edited.
  713.  
  714.     Editing of the text within each field follows the standard Windows format.
  715.     Home and End moves to the beginging and end of the field, cursor keys move
  716.     left and right, Delete deletes the character at the cursor position and
  717.     backspace is destructive.  If a group of characters are highlighted in
  718.     blue, which the whole of each field will be when it receives focus, they
  719.     will be deleted if a single character is pressed to replace them or Delete
  720.     is pressed.  A group of characters may also be highlighted by dragging the
  721.     cursor.
  722.  
  723.     When you have finished entering or editing the record click on OK to save
  724.     the changes you have made to disk.  Clicking on Cancel instructs the
  725.     system to discard the changes you have made and leave the original record
  726.     intact, if one existed.
  727.  
  728. 2   Browsing through your catalogue
  729.  
  730.     Pressing Browse on the handset accesses the Browse Screen.
  731.  
  732.     The Browse Screen is divided into three areas as follows:
  733.  
  734.         Menu bar            taking up the first line
  735.  
  736.         Catalogue display   showing 20 or 21 entries from the database at
  737.                             a time
  738.  
  739.         Message bar         displayed at the foot of the screen if Word Filter
  740.                             has been used in the current run.
  741.  
  742.     On accessing the Browse Screen, the first twenty-one entries in your
  743.     database, based on a alphabetical sort of the disc name, will be
  744.     displayed.  (If no entries are displayed and the system beeps, your
  745.     database does not contain any records.) Each line contains the following:
  746.  
  747.         Disc name
  748.         Composer
  749.         Music type
  750.         Disc reference
  751.         The number of tracks on the disc
  752.         Total playing time
  753.         Custom play programme
  754.  
  755.     The information displayed is too wide for the window and a scroll bar is
  756.     incorporated at the foot of the window to allow you to scan the
  757.     information.
  758.  
  759.     You may size the browse screen, by dragging the boarders, and reposition them
  760.     by dragging the title bar.  CDPlayer will "remember" your changes and use
  761.     them the next time the program is launched.
  762.  
  763.     When the Browse Screen is displayed, the first entry will be highlighted.
  764.     You may scroll through your CD catalogue using the vertical scroll bar or
  765.  
  766. CDPlayer for Windows - (C)1993 Jupiter Software         Page 13
  767.  
  768.     using the following keys:
  769.  
  770.         Page up     Pressing Page up will cause the list to scroll back a
  771.                     screen of records.
  772.  
  773.         Page down   Pressing Page down will cause the list to scroll forward a
  774.                     screen of records.
  775.  
  776.         Up Arrow    Pressing Up Arrow moves the highlight bar to the previous
  777.                     record, scrolling the list back if necessary.
  778.  
  779.         Down Arrow  Pressing Down Arrow moves the highlight to the next record,
  780.                     scrolling the list forward if necessary.
  781.  
  782.         Home        Pressing Home displays the extreme left of the record
  783.                     lines.
  784.  
  785.         End         Pressing End displays the extreme right of the record
  786.                     lines.
  787.  
  788.         Ctrl+Home   Pressing Ctrl+Home displays the first 20 entries in the
  789.                     list.
  790.  
  791.         Ctrl+End    Pressing Ctrl+End displays the last 20 entries in the list.
  792.  
  793.     Goto section
  794.  
  795.     It is possible to jump to the start of each section of the alphabet by
  796.     pressing the letter on the keyboard.
  797.  
  798.     Status
  799.  
  800.     You may discover the total number of CDs recorded in your catalogue by
  801.     selecting Status from the file menu.
  802.  
  803.     Word Filter
  804.  
  805.     Selecting Filter toggle from the menu bar will cause the system to request
  806.     the entry of a filter string, with the prompt Enter filter string.  The
  807.     filter string can be up to 10 characters long (30 characters for
  808.     registered users) and may be a single word or a group of words.  After
  809.     entering the string, click on OK to activate filtering or on Cancel to
  810.     abort the request.  On accepting a string the system will redisplay the
  811.     browse list containing only those records which contain the string
  812.     entered in the composer/artist field (for registered users, the string may
  813.     be present within any field) and case is ignored.
  814.  
  815.     You may use the word filter to, for example, display all music by Mozart.
  816.     For registered users, this will result in all discs being listed which
  817.     contain Mozart in any field, e.g.  as the composer or within track
  818.     details.  It will therefore pick up any compilation discs which include
  819.     Mozart music.  Once the list is displayed you may scroll through the
  820.     filtered list in the same way as you scroll through the full list.
  821.     Filtering is deactivated by selecting Filter toggle for a second time or
  822.     by exiting from the Browse Window.
  823.  
  824.     While filtering is active a message is diplayed at the foot of the filter
  825.     window giving details of the filter string in use.
  826.  
  827.     Exit From Browse Mode
  828.  
  829.     You exit from the Browse Window by selecting Exit from the menu bar, or
  830.  
  831. CDPlayer for Windows - (C)1993 Jupiter Software         Page 14
  832.  
  833.     using the control-menu box.
  834.  
  835. 3   Editing during browsing
  836.  
  837.     When browsing through your database, a record may be selected
  838.     for viewing or editing by highlighting it on the Browse Screen and
  839.     selecting Edit from the Edit menu, or by double clicking on the entry.  The
  840.     Record Edit Screen will be displayed, showing the information currently
  841.     recorded.  You may edit the selected record, if required, in the same way
  842.     as the current disc is edited, see previous section.
  843.  
  844. 4   Deleting a record  (Registered version only)
  845.  
  846.     If you wish to delete a record, highlight it in the Browse Window
  847.     and select Delete from the Edit menu.
  848.  
  849.     A window will be displayed asking for confirmation that you wish to
  850.     delete the record.  If you do wish to remove the data, click on Yes and it
  851.     will be deleted.  Clicking on No will leave the entry in the database.
  852.  
  853. 5   Rebuilding the database index  (Registered version only)
  854.  
  855.     It is possible your database indexes may become corrupt.  This is not
  856.     likely to happen very often, but loss of power to the system while the
  857.     indexes are being updated is one event which will definitely corrupt the
  858.     data.  An option has therefore been included under the File menu of the
  859.     full handset to enable you to rebuild the index at any time.  The system
  860.     will also suggest the rebuilding of the indexes if it detects that the
  861.     data is not correct.
  862.  
  863.     To rebuild the index, select File from the menu bar, followed by Rebuild
  864.     database index.  A window will open asking you to confirm that you would
  865.     like the indexes rebuilt.  Clicking on Yes will cause the system to
  866.     proceed, while selecting No will abort the process.
  867.  
  868. 6   Export data
  869.  
  870.     The information stored in the CD catalogue may be exported in one of two
  871.     formats:
  872.  
  873.           Record format       Where each field is written to the file on a
  874.                               separate line, each record occupying a fixed
  875.                               number of lines. (press X)
  876.  
  877.           CSV                 Where the whole record is written on one line in
  878.                               Comma Separated Variable format. (press V)
  879.  
  880.     In both cases the order of the record is as follows:
  881.  
  882.                     Disc ID
  883.                     Name
  884.                     Composer/artist
  885.                     Music type
  886.                     Custom play
  887.                     Disc reference
  888.                     30 track titles
  889.  
  890.     On selecting the appropriate option form the File menu of the full
  891.     handset, you will be presented with the Save As dialog box.
  892.  
  893.     Enter the full path and name and click on OK.  If you select the option
  894.     but do not wish to proceed, clicking on Cancel will abort the routine and
  895.     return you to the handset.
  896.  
  897.     If the file already exists you will informed of this fact and asked to
  898.     confirm that you wish to proceed.
  899.  
  900.     A count of the records being exported is displayed as the file is created
  901.     and on completion a message indicating that the process was successful.
  902.  
  903. 7   Import data
  904.  
  905.     Data may be imported from a file stored in Record Format, see above.  The
  906.     system uses the Disc ID to identify records and if the ID already exists
  907.     in the database the record will be updated, if it does not exist a new
  908.     record will be created.  You may use this facility to merge multiple
  909.     databases.
  910.  
  911.     On selecting the import data option from the File menu of the full
  912.     handset, you will be presented with the Open File dialog box.
  913.  
  914.     Enter the full path and name and click on OK.  If you select the option
  915.     but do not wish to proceed, clicking on Cancel will abort the routine and
  916.     return you to the handset.
  917.  
  918.     If the file does not exist, or is not in the correct format, a message
  919.     will be displayed.  If the file is acceptable, the data will be imported
  920.     and a progress message displayed.  When the import is complete a message
  921.     to this effect will be displayed.
  922.  
  923.     If any new records are added during an import they will not contain
  924.     details of track time, and the total number of tracks may not be correct
  925.     as this will be based on the track titles recorded.  However, both the
  926.     track times and the total number of tracks will be updated by the system
  927.     on the first occasion that the CD is loaded and the data record accessed.
  928.  
  929. 8   Open File Window
  930.  
  931.     When you select an option that requires you to enter the name of a file to
  932.     open or load, the system will open the Open File dialog window.
  933.  
  934.     Type a file name, or select a name from the files box, and select OK.  If
  935.     the file you want has an extension other than that used as the default,
  936.     type an asterisk (*), a period, and the extension (e.g. *.TXT), then
  937.     choose OK to see a list of files with the extension in the files box.
  938.  
  939.     If the file is not in the current directory, or on the current drive,
  940.     select the drive or directory you wish to use, from the directory box, and
  941.     click OK.
  942.  
  943.     If you do not wish to continue to select a file to use, select Cancel.
  944.  
  945. 9   Save as Window
  946.  
  947.     When you select an option that requires you to enter the name of a file to
  948.     save, the system will open the Save As dialog window.
  949.  
  950.     Type a file name and select OK.
  951.  
  952.     If you do not wish the file to be stored in the current directory, or on
  953.     the current drive, select the drive or directory you wish to use, from
  954.     the directory box, and click OK.
  955.  
  956.     If you do not wish to continue to select a file to use, select Cancel.
  957.  
  958. IMPORTING AN EXISTING CD DATABASE
  959.  
  960. A facility is included to allow you to automate the import of an existing
  961. database, allowing CDPlayer to attach your existing details to its internally
  962. calculated disc id.
  963.  
  964. To do this proceed as follows:
  965.  
  966. 1       Create an export file from your existing database in record format.
  967.         Be sure to allocate a unique 8 digit Hex string to each disc and
  968.         include this as the disc id.  At this point it does not matter what
  969.         that string is, you could start at "00000001" and increment by 1 for
  970.         each disc, or use the id created by your existing player.
  971.  
  972. 2       Launch CDPlayer.
  973.  
  974. 3       Import the data into CDPlayer.
  975.  
  976. 4       Enter each disc in turn then:
  977.                 Select Browse
  978.                 highlight the record which corresponds to the disc
  979.                 Select Edit
  980.                 Select Attach record to current disk
  981.  
  982.         If you have selected the correct record, confirm that this is the case
  983.         and the disc id for the currently inserted disk will be allocated to
  984.         the record.  Details of track times will also be updated to complete
  985.         the record.
  986.  
  987. If the disc inserted is already recorded in the database you will be informed
  988. of this fact.  If no disc is in the drive an error message will be shown.
  989.  
  990. You do not have to "link" the records to the correct disc in one session, you
  991. could do this over a period of time as and when you play the discs.
  992.  
  993.  
  994. CDPlayer for Windows - (C)1993 Jupiter Software         Page 15
  995.  
  996. D. INSTALLATION
  997.  
  998. An automated installation routine is provided on the disk.  To run this
  999. routine insert the disk in your floppy drive, launch Windows and select File
  1000. from the Program Manager menu bar, followed by Run...  and enter:
  1001.  
  1002.           A:SETUP          <Enter>
  1003.  
  1004. and click on Continue.  (``A" will either by ``A" or ``B" depending on the
  1005. drive being used.)
  1006.  
  1007. The install program will install for windows in a directory called CDPLAYER
  1008. on drive C by default, create a Program Group called Jupiter and create a
  1009. Program Item for CDPlayer.  You may change the default directory during
  1010. installation.
  1011.  
  1012. You may launch by double clicking on the icon in the Jupiter Program Group.
  1013.  
  1014. If you place CDPlayer for Windows in the same directory as for CDPlayer for
  1015. DOS, they will share the same database files.  Alternatively, you may use the
  1016. configuration options to inform for CDPlayer for Windows where to find the
  1017. data files used by the DOS version.  The programs use a common file structure
  1018. and this will not cause any damage to your data.
  1019.  
  1020. To update a shareware or earlier installation, simply copy PLAYER.EXE from the
  1021. issue disk to the directory containing your shareware version of the program.
  1022.  
  1023.  
  1024.